Home | About Us | Products | Accessories | USA Distributors | International Distributors | Contact Info
Pneuton A specifications
pNeuton Transport Ventilation
pNeuton model A Specifications

pneuton_front.jpg

Description:

  • Pneumatically operated
  • Intended for use on pediatric/adult patients, 23 kg and above
  • Demand flow system for spontaneous breathing up to 140 L/min
  • Pressures displayed on manometer
  • Modes of Operation: IMV, CPAP
  • Mandatory breath flow rate is fixed at 36 L/min
  • Visual and audible patient disconnect alarm system with remote output for use in areas where the patient cannot be directly monitored (MRI)
  • MRI compatible: up to 3.0 T static field strength, 6.9 G/cm spatial field gradient, 300 V RF power, shielded
  • Weight: 6.6 pounds  (3.0 kg)
  • Dimensions: 5"H x 10"W x 7"D (13 x 25 x 18 cm)
  • Input gas requirement: 55 psi + 15 psi                    (3.8 bar + 1 bar)
  • Meets International Standards for transport ventilators:                                                                ~ ASTM:  Ventilators Intended for Use in Critical Care (F 1100-90)                                                        ~ ISO: Lung Ventilators for medical use, Part 3 (10651-3)

 
Control Settings:

   Parameter
  Range
Mandatory Breaths
On or Off
Respiratory Rate
3 - 50 bpm
Tidal Volume
360 - 1,500 ml
Peak Pressure
15 - 75 cmH2O
PEEP / CPAP
0 - 20 cmH2O
Oxygen
100% or 65%

 
Visual and Audible Alarms:
 
  All pneumatic alarm system (no batteries) that is always on
  • Patient circuit disconnection
  • Low oxygen inlet pressure (below 30 psi)
  • Automatic reset
  • 1 minute silence / reset button
  • Remote alarm output
  • Need more information?  Call 888-448-1238 or send us an e-mail